Repairs
Repair & Maintenance
Older doors often have years of use left in the panels and the frame. What fails is the smaller hardware around them. Replacing rollers, hinges, brackets and seals on a sound door is one of the most worthwhile jobs we do.
Which one do I need?
- During the power outage you pulled the red cord and tried to lift the door by hand.Garage Door Safety Inspection
- Every morning the door announces itself to the whole street: a long metallic squeal as it climbs, a rattle at the top, and a groan on the way back down.Garage Door Tune-Up
- The door came down fine but with a scraping noise, and now the vertical track on one side is bowed away from the wall.Off-Track Garage Door Reset
- You misjudged the last metre of the driveway and felt the bumper meet the door.Garage Door Panel Replacement
- The strip under the door has gone as hard as a hose left out for ten summers.Garage Door Bottom Seal Replacement
- The new door went in last year and looks perfect, but the old wooden stop and its tired seal were left in place.Garage Door Perimeter Weatherstrip
Repair & Maintenance
Inspection, adjustment, sealing, and section-level repairs.
Garage Door Safety Inspection
Following the force after an impact
When a vehicle or something heavy has struck the door, the technician starts at the mark and works outward along the force's path. A dented bottom section can push a roller sideways in its track, bend the track itself where the roller was, shift a bottom bracket and change how that cable sits on its drum. The hinges beside the impact are checked for splits and the strut for a kink.
The door is then observed through a cycle to see whether it now twists or hesitates at the point of damage. The finding is written up as cosmetic, hardware repair, section replacement or a counterbalance that needs resetting, so you can decide with the whole picture in view.